https://www.quatm.com/en/docs/monitoring/Recent content in Monitoring on QuatmHugoenhttps://www.quatm.com/en/docs/monitoring/lfi3751/Mon, 01 Jan 0001 00:00:00 +0000https://www.quatm.com/en/docs/monitoring/lfi3751/Overview LFI3751 drives the Wavelength Electronics high-precision semiconductor laser temperature controller over PyVISA. from quatm.monitor.LFI3751 import LFI3751 tc = LFI3751(addr="USB0::...") temp = tc.get_temperature() tc.set_setpoint(25.0)https://www.quatm.com/en/docs/monitoring/gaussmeter/Mon, 01 Jan 0001 00:00:00 +0000https://www.quatm.com/en/docs/monitoring/gaussmeter/Overview PCE_MFM_3000 drives the PCE Instruments magnetic flux density meter and reads the magnetic induction in real time over a serial port. from quatm.monitor.PCE_MFM_3000 import PCE_MFM_3000 gauss = PCE_MFM_3000(port="/dev/ttyUSB0") field = gauss.get_field() # Returns the value in mThttps://www.quatm.com/en/docs/monitoring/cavity-environmental-sensors/Mon, 01 Jan 0001 00:00:00 +0000https://www.quatm.com/en/docs/monitoring/cavity-environmental-sensors/Overview The arduino driver reads temperature, humidity and pressure sensor data from inside the cavity through an Arduino Nano. from quatm.monitor.cavity_arduino import arduino env = arduino(port="/dev/ttyACM0") temp, hum, press = env.read_all()https://www.quatm.com/en/docs/monitoring/pc-health-monitoring/Mon, 01 Jan 0001 00:00:00 +0000https://www.quatm.com/en/docs/monitoring/pc-health-monitoring/Overview PC_health uses psutil to monitor the CPU utilization, memory usage, disk space and network traffic of the experiment control computer, preventing experiment interruptions caused by resource exhaustion. from quatm.monitor.pc_health import PC_health health = PC_health() cpu = health.get_cpu_percent() mem = health.get_memory_usage() disk = health.get_disk_free()https://www.quatm.com/en/docs/monitoring/ds1054z/Mon, 01 Jan 0001 00:00:00 +0000https://www.quatm.com/en/docs/monitoring/ds1054z/Overview The ds1054z driver controls the Rigol DS1054Z four-channel digital oscilloscope and performs waveform acquisition and automatic measurements over PyVISA. from quatm.monitor.ds1054z import ds1054z scope = ds1054z(addr="USB0::...") waveform = scope.get_waveform(channel=1) vpp = scope.measure_vpp(channel=1)